DAPAudio ACX-34 User's Guide download pdf (Page 14)

Switching between USB and SD playback

Make sure that an USB stick as well as a SD-card are inserted. If you are in USB mode, push the USB/SD

(19) button. Now the display will search for a SD- card

If a SD card is found, the dispay will briefly show SD.

If no SD card is found, the display will show No SD.

Connecting Inputs

Use the jack inputs at the front or the XLR input connectors on the rear to supply audio signals to your DAP

Audio amplifier. The connectors accept balanced and unbalanced audio connections. (The PA- Series

amplifiers are configured standard with "Pin 2 hot" on XLR inputs. For more Information, see the section on

Connection cables on page 14.

Connecting Outputs.

Speakers are connected using terminal connectors. See the examples below and following page.

Low impedance outputs

You can use as many speakers as you want as long as the total impedance matches the amplifiers

output.

Example 1: using the 4Ω output with two 8Ω speakers.

Fig. 5

Example 2: using the 4Ω output with four 4Ω speakers

Fig. 6

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

No comments

DAPAudio ACX-34 User's Guide Page 14